Stainless Steel Archives - Page 4 of 14

Erowa pallet Ø148 P ER-115521 ER-041912 Compatible

0 out of 5

Erowa pallet Ø148 P ER-115521 ER-041912 compatible

Erowa ER-115521 ER-041912 Pallet compatible ø 148 P. Centering integrated in the pallet. With optimized center of mass. Works perfectly with all Erowa Tooling.

$825.00

System 3R 3R-204 compatible Height adapter WEDM

0 out of 5

System 3R 3R-204 compatible Height adapter WEDM

3R-204 rapid holding Systems version Height adapter WEDM - Height adjustment ±70 mm. - Weight 1.9 kg.

Ask for Quote

3R 3R-602.12-1 compatible Pneumatic chuck, MacroTwin

System 3R Macro 3R-613.6 Compatible Vice

System 3R 3R-602.12-1 compatible Pneumatic chuck, MacroTwin

5.00 out of 5

System 3R 3R-602.12-1 Pneumatic chuck MacroTwin In RHS version. Pneumatic chuck for Macro or MacroTwin. Horizontal mounting on the machine table. Supplied with two drawbars 3R-605.10

Fixed index positions 4x90°
Air-blast cleaning of the Z-references
Clamping force 2x6700 N

$1,825.00

System 3r 3Rulers Compatible, Wire EDM Tooling

System 3R 3R-239-445 compatible 3Ruler 445mm

0 out of 5

System 3R 3R-239-445 compatible 3Ruler 445 mm

System 3R 3R-239-445 compatible 3Ruler 445 mm. 3Rulers for different machines. The cross-section is matched to be the length to ensure optimal stability. Length 445 mm Width 60 mm Height 30 mm End stops and tabs supplied inclusive.

$4,250.00

3R 3R-602.27-1 compatible Manual chuck Macro

System 3R 3R-602.27-1 compatible Manual chuck Macro

5.00 out of 5

System 3R 3R-602.27-1 compatible Manual chuck Macro

System 3R 3R-602.27-1 compatible Manual chuck Macro Chuck adapter with lever for Macro holder in the WEDM system. Supplied with drawbar. Note: When mounted on the reference element, the two clamping jaws must be tightened with the same torque, 4 Nm. - Required drawbar 3R-605.27RS. - Recommended maximum workpiece weight 7 kg. - Fixed index positions 4x90°.

$1,865.00

Erowa Compatible Pallets, EROWA ITS Compatible

Erowa ER-115660 compatible Pallet ø 115 G

5.00 out of 5

ER-115660 RHS Version Steel, rust-resistant. With centering plate G (ground). Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank Through the pallet with M8 bolts or through the blank with M10 bolts.

$510.00

Erowa Compatible Plates, EROWA ITS Compatible

Erowa Centering plate G Inox ER-036658 Compatible

0 out of 5

Erowa ER-036658 Centering Plate G Inox

Erowa ER-036658 Centering Plate G Inox Ground including 8 supporting feet M8 per plate For workpieces, jigs and fixtures in chip-removal machining.100% EROWA Compatible

$125.00

Erowa Compatible Plates, EROWA ITS Compatible

EROWA COMPATIBLE ER-035154 Centering plate 50x90

Erowa centering plate ER-035154 compatible Centering plate 50x90 RHS-E4603

0 out of 5

Erowa ITS Compatible RHS Centering plate 50x90

$22.00

Levelling Adjustable Universal Fixture

5.00 out of 5

Specifications: can be clamping accurately and
suitable for square and long parts on wire cut EDM machine.
Repeatability: 0.005mm/100mm
Application: Mount On Wire cut EDM machine table.
Material: stainless steel

$6,450.00

RHS Wire EDM Clamp machine square vise

5.00 out of 5

specifications: can be accurate clamping and suitable for square and long parts. The body can be adjusted in X Y Z slightly Application: Mount On Wire EDM machine for clamping workpiece Repeatability: 0.005mm/100mm Marterial: stainless steel AS good as GERARDI VISE, VERTEX VISE.

$5,700.00

System 3R 3R-242.82HP Compatible User kit

5.00 out of 5

System 3R 3R-242.82HP Compatible User kit.3R-239.1 compatible, Ruler vice 3R-272HP compatible, Levelling adapter HP 3R-292.66HP compatible, Magnum Holder HP

$6,290.00

System 3R WEDM 3R-242HP Compatible User kit.

5.00 out of 5

System 3R WEDM 3R-242HP Compatible User kit.

System 3R WEDM 3R-242HP Compatible User kit. Includes:3R-225 Compatible Reference stop, 3R-272HP Compatible Levelling adapter HP, 3R-292.3 Compatible SuperVice <100 mm, 3R-293.3 Compatible SuperVice Ø8-90 mm, 3R-294.3 Compatible, Vice <100 mm, 3R-914.07 Compatible, Torque wrench 7 Nm 1 pcs, Allen key, 3 mm and 5 mm

$8,900.00

System 3R 3R-242S-4 Wire EDM User kit Compatible

5.00 out of 5

System 3R 3R-242S-4 Wire EDM User kit Compatible includes System 3R 3R-292.6S wire EDM SuperVice Magnum Compatible,3R-262HP Levelling adapter Macro compatible, System 3R 3R-605.26 Drawbar Wire EDM Compatible, 3R-602.2 Manual chuck compatible and allen keys of 3mm, 5mm, 6mm.

3R-262HP Levelling adapter Macro compatible

Rapid Holding Systems version System 3r 3R-262HP Levelling adapter Macro compatible is useful for manual mounting of SuperVice, a holder or a fixture in the WEDM system. This Wire EDM Levelling Adapter is compatible with system 3R perfectly but at a fraction of cost. Prove wire EDM productivity because adjustable in three axes.

System 3R 3R-292.6S wire EDM SuperVice Magnum Compatible. Rapid Holding Systems version 3R-292.6S wire EDM SuperVice Magnum Compatible is perfect for Wire EDM need Because it is useful for clamping rectangular workpieces up to 150 mm. This wire EDM vise mounts on HP, Magnum or MacroTwin levelling adapter. Tightening torque value is 10Nm.

System 3R 3R-605.26 Drawbar Wire EDM Compatible. Rapid Holding Systems version 3R-605.26 Compatible Drawbar is manual and is supplied in pack of 50pcs. Drawbar Ø20×32 mm and is rust resistant

$6,100.00

System 3R 3R-242S-3 compatible User kit

0 out of 5

System 3R 3R-242S-3 compatible User kit

System 3R 3R-242S-3 compatible User kit
3R-232 compatible Levelling adapter, 1 pcs.
3R-293.33 compatible Universal holder, 1 pcs.
3R-333.03 compatible Allen key, 3 mm, 1 pcs.
3R-333.05 compatible Allen key, 5 mm, 1 pcs.

$5,575.00

System 3R 3R-242S-2 compatible User kit

0 out of 5

System 3R 3R-242S-2 compatible User kit

System 3R 3R-242S-2 compatible User kit3R-232S compatible Levelling adapter 1 pcs. 3R-292.6S compatible SuperVice Magnum, 1 pcs. 3R-333.03 compatible Allen key 3 mm, 1 pcs. 3R-333.05 compatible Allen key 5 mm, 1 pcs.

$4,340.00

3R 3R-230.1 Compatible WEDM Clamping kit M6

System 3R 3R-230.1 Compatible WEDM Clamping kit M6

0 out of 5

System 3R 3R-230.1 Compatible WEDM Clamping kit M6

For clamping workpieces on Wire EDM rulers, etc. User Kit for clamping rectangular, round or thin workpieces. For manual mounting of Super Vice, a holder or a fixture in the WEDM machine system. - Weight 1.8 kg.

$815.00

System 3R 3R-262HP compatible Levelling adapter Macro

System 3R 3R-266.4 Compatible Fixed mounting head Macro

0 out of 5

System 3R 3R-266.4 compatible Fixed mounting head Macro

System 3R 3R-266.4 compatible Fixed mounting head Macro. For mounting SuperVice, a holder or a fixture in the Macro system.- Recommended maximum load 15 kg. - Adapted for automatic changing. - Delivered without drawbar.

$2,795.00

Wire EDM Tooling System 3R MIC2616 Sodick AQ750L Compatible

5.00 out of 5

3R-239-795.86 compatible 3Ruler assembled with System 3R 3R-200.49J-1 Compatible reference element and System 3R 3R-200.3J-1 Compatible reference element along with 3R-242.82HP Compatible user kit. 3R-242.82HP Compatible Includes:3R-239.1, Ruler vice compatible 3R-272HP, Levelling adapter HP compatible 3R-292.66HP, Magnum Holder HP compatibleWire EDM Tooling System kit 3R MIC2616 Sodick AQ750L Compatible Works perfectly on Sodick. and Makino. Below are the specification of all reference elements.

RHS BRANDED SYSTEM 3R EQUIVALENT SPECIFICATIONS
RHS-WL495- System 3R 3R-200.49J-1 Compatible reference element	L=495mm
RHS-WL298- System 3R 3R-200.3J-1 Compatible reference element	L=345mm
3Ruler: 3R-239-795.86 compatible	L =795mm
User kit: 3R-242.82HP Compatible	3R-239.1 compatible, Ruler vice 3R-272HP compatible, Levelling adapter HP 3R-292.66HP compatible, Magnum Holder HP

Contact Us for more information.

$17,130.00

System 3r 3R-272HP Wire EDM Levelling Adapter Compatible

5.00 out of 5

System 3r 3R-272HP Wire EDM Levelling Adapter Compatible. Rapid Holding Systems version System 3r 3R-272HP compatible is useful for manual mounting of SuperVice, a holder or a fixture in the WEDM system. This Wire EDM Levelling Adapter is compatible with system 3R perfectly but at a fraction of cost. Prove wire EDM productivity because adjustable in three axes.Specifications:

Adjustable in three axes
Supplied without drawbar.
Recommended maximum load 15 kg.
Weight 1.4 kg.

$2,900.00

System 3R 3R-262HP compatible Levelling adapter Macro

0 out of 5

System 3R 3R-262HP compatible Levelling adapter Macro

System 3R 3R-262HP compatible Levelling adapter Macro. For mounting SuperVice, a holder, or a fixture in the Macrosystem. - Delivered without drawbar. - Adapted for automatic changing. - Recommended maximum load 15 kg. - Adjustable in three axes.

$2,825.00

System 3R 3R-232S compatible Levelling adapter

5.00 out of 5

System 3R 3R-232S compatible Levelling adapter

System 3R 3R-232S compatible Levelling adapter. For mounting SuperVice, a holder or a fixture directly on the machine table.
- Adjustable in three axes when clamped in the machine.
- Recommended maximum load 15 kg.

$3,395.00

System 3R 3R-602.26 Compatible Manual chuck Macro

0 out of 5

System 3R 3R-602.26 Compatible Manual chuck Macro

System 3R 3R-602.26 Compatible Manual chuck Macro. For Macro holder. - Tightening torque 6 Nm. - Clamping force 6000 N - Fixed index positions 4x90°

$1,550.00

WEDM Chucks/Mounting Heads, Wire EDM Tooling, Wire EDM Vises

System 3R 3R-218S, Holder set Compatible Wire EDM Tooling Kit

5.00 out of 5

System 3R 3R-218S, Holder set compatible Wire EDM Tooling Kit is Set of three holders and fixing parts. Rapid Holding Systems premium System 3R 3R-218S, Holder set Wire EDM Tooling Kit has Reversible jaws and Holder length 70/23.5 mm.
• Recommended maximum workpiece weight 60 kg
• Weight per set 3 kg

$3,816.00