248-250-8937
519-999-9723
+1 844 686-0671
ER-010505 Erowa OEM Square 25 Chip Guard
Version Set of 10 guards, oil-resistant rubber. Application Protection against chips during electrode manufacturing.
ER-010502 Erowa OEM Square 15 Chip Guard
Version Set of 10 guards, oil-resistant rubber. Application Protection against chips during electrode manufacturing.
ER-010497 Erowa OEM Square 15 Electrode Shaft M5, Set of 10
Version Set of 10 blanks, hardened, ground, including M5 bolts. Application To screw on to electrode blanks.
ER-010495 Erowa OEM Square 15 Alignment Rail
Version Steel, hardened, ground. Application Testing of concentricity and angular accuracy of holder to ITS system.
ER-010491 Erowa OEM Square 25 Electrode Shaft, Set of 24
Version Set of 24 shafts, soft steel, drawn profile. Application To solder or bond to blanks of up to 40 mm square.
ER-009866 Erowa OEM Square 15 Electrode Shaft
Version Set of 40 shafts, drawn steel. Application To solder or bond to copper or graphite electrode blanks.
ER-115379 Erowa OEM Pallet Ø 148 G Blank
Version Steel, rust-resistant. Without mounting hole pattern. With centering plate G (ground). With optimized center of mass. Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank In any suitable manner.
Erowa compatible ER-010753 supporting feet M5X16
Erowa compatible ER-010753 supporting feet. Er-09214 centering plate supporting foot M5X16. useful for RHS version centering plate 50. 100% cross compatible with Erowa supporting foot as well as centering plate 50. Supporting feet are 2 piece design using 1 part foot and 1 part threaded rod for better durabilty.
$14.40
Add to cart
Erowa ER-030671 compatible Centering plate G100 M8 x 1 (set of 5)
Erowa ER-030671 compatible Centering plate G100 M8 x 1 (set of 5). Rapid Holding Systems version palletset works same as Erowa ER-030671.
Application: To be fitted directly to workpiece and electrodes
to be used on flat chucks.
Also, available to sell as single pc.
$1,875.00
Add to cart
Erowa ER-030671 compatible Centering plate G100 M8 x 1 PalletSet W
Erowa ER-030671 compatible Centering plate G100 M8 x 1. Rapid Holding Systems version palletset works same as Erowa ER-030671.
Application: To be fitted directly to workpiece and electrodes to be used on flat chucks.
Also, available to sell as a set of 5.
$395.00
Add to cart
Mini Self centering vise System 3R 60X54mm-25mm clamping
Self-centering vise 60X54mm on System 3R 54 or 70mm macro pallet. RHS mini self-centering vise is 25mm clamping mounts directly on System 3R parts. Special holder to clamping small weight workpiece. Use a regular handle to threading the side screw to lock the workpiece and centering on the holder.
| SPECIFICATIONS | |
| Size | 60X54X52mm |
| Repeatability | within 0.005 |
| Material | High grade steel 48-52HRC |
| Max Clamping | 25mm |
| Torque | 20NM |
| Weight | 1kg |
$810.00
Add to cart
Self Centering Vise 60x54x61.5mm, System 3R Compatible
Precision self centering vise designed for 4th and 5th axis CNC machining, EDM workholding, and compact palletized fixture systems. Built from hardened chrome steel with 48–52 HRC hardness, this System 3R compatible vise provides ±0.005mm repeatability, 31mm max clamping width, and 200N clamping power. Its 60x54x61.5mm body supports accurate small-part positioning, repeatable fixture changes, and stable precision machining setups.
$810.00
Add to cart
3R-200.7J-STD compatible Reference element WEDM, 570 mm
3R-200.7J-STD compatible Reference element WEDM, 570 mm
$1,195.00
Add to cart3R-200.6J-STD compatible Reference element WEDM, 490 mm
3R-200.6J-STD compatible Reference element WEDM, 490 mm
$1,195.00
Add to cart3R-200.6J-1 compatible Reference element WEDM, 545 mm
3R-200.6J-1 compatible Reference element WEDM, 545 mm
$1,195.00
Add to cart3R-200.5J-STD compatible Reference element WEDM, 381 mm
3R-200.5J-STD compatible Reference element WEDM, 381 mm
$915.00
Add to cart3R-200.5J-71 compatible Reference element WEDM, 520 mm
3R-200.5J-71 compatible Reference element WEDM, 520 mm
$1,260.00
Add to cart3R-200.5J-2 compatible Reference element WEDM, 570 mm
3R-200.5J-2 compatible Reference element WEDM, 570 mm
$1,260.00
Add to cart3R-200.4J-STD compatible Reference element WEDM, 270 mm
3R-200.4J-STD compatible Reference element WEDM, 270 mm
$960.00
Add to cart3R-200.4J-71 compatible Reference element WEDM, 435 mm
3R-200.4J-71 compatible Reference element WEDM, 435 mm
$1,225.00
Add to cart
3R-200.3J-4 compatible Reference element WEDM, 345 mm
3R-200.3J-4 compatible Reference element WEDM, 345 mm
$1,250.00
Add to cart
Self Centering Vise 60x54x60.2mm, Erowa Compatible
Precision self centering vise for 4th and 5th axis CNC machining, EDM workholding, and compact palletized fixture systems. Built from hardened chrome steel with 48–52 HRC hardness, this Erowa compatible compact vise provides ±0.005mm repeatability, 31mm max clamping width, and stable 200N clamping power. Its 60x54x60.2mm body is ideal for accurate small-part positioning, repeatable fixture changes, and precision machining workflows.
$810.00
Add to cart
Self centering Vise Erowa compatible 91X51mm-55mm clamping
Self-centering vise 91X51mm on Erowa ITS plate. RHS mini self-centering vise is 55mm clamping mounts directly on System 3R parts. Special holder to clamping small weight workpiece. Use a regular handle to threading the side screw to lock the workpiece and centering on the holder. Comes premounted on Erowa equivalent plate.
| SPECIFICATIONS | |
| Size | 91x51x63.2mm |
| Repeatability | within 0.005 |
| Material | High grade steel 48-52HRC |
| Locking Force | 3000N |
| Max Clamping | 55mm |
| Torque | 25NM |
| Weight | 2kg |
$875.00
Add to cart
Mini Precision 5 Axis Self Centering Vise on Compatible Erowa ER-011599 100P
Mini Precision Self Centering Vise on ER-011599 equivalent
Mini Precision Self Centering Vise on Centering Plate ER-011599 compatible 100P. Clamping Maximum Work Piece Size 70mm. Double Self Centered with Repeating Accuracy of 0. for Vertical and Horizontal Processing Machine.
$895.00
Add to cart