248-250-8937
519-999-9723
+1 844 686-0671
Erowa ER-036345 Compatible 6-in-1 CNC Manual Chuck
Precision Erowa ER-036345 compatible 6-in-1 CNC Manual Chuck designed for CNC workholding, EDM workholding, electrode production, and repeatable fixture positioning. Built from chrome steel with 57–60 HRC hardness, this manual multi-chuck provides 10000N + 10000N clamping power and 0.002mm repeatability. Its 450x270x82.5mm six-station layout supports six D100 chuck positions on one base plate for stable clamping, accurate positioning, and efficient setup changeover.
Read more
Erowa ER-036345 Compatible 4-in-1 CNC Manual Chuck
Precision Erowa ER-036345 compatible 4-in-1 CNC Manual Chuck designed for CNC workholding, EDM workholding, electrode production, and repeatable fixture positioning. Built from chrome steel with 57–60 HRC hardness, this manual multi-chuck provides 10000N + 10000N clamping power and 0.002mm repeatability. Its 310x270x82.5mm four-station layout supports four D100 chuck positions on one base plate for stable clamping, accurate location, and efficient setup changeover.
Read more
Erowa ER-036345 Compatible 3-in-1 CNC Manual Chuck
Precision Erowa ER-036345 compatible 3-in-1 CNC Manual Chuck designed for CNC workholding, EDM workholding, electrode production, and repeatable fixture positioning. Built from chrome steel with 32–60 HRC hardness, this manual multi-chuck provides 10000N + 10000N clamping power and 0.002mm repeatability. Its 460x102x82.5mm three-station design supports three D100 chuck positions on one base plate for efficient setup changeover, stable clamping, and accurate workholding performance.
Read more
Erowa ER-036345 Compatible 2-in-1 CNC Manual Chuck
Precision Erowa ER-036345 compatible 2-in-1 CNC Manual Chuck designed for CNC workholding, EDM workholding, electrode production, and repeatable fixture positioning. Built from chrome steel with 32–60 HRC hardness, this manual multi-chuck provides 10000N + 10000N clamping power and 0.002mm repeatability. Its 300x102x82.5mm dual-station design supports two D100 chuck positions on one base plate, helping improve setup efficiency, stable clamping, and accurate workholding performance.
Read more
Erowa ER-035519 Compatible 12-in-1 Optimized Pneumatic Chuck with CNC Base Plate 600x410x62.5mm
Precision Erowa ER-035519 compatible 12-in-1 Optimized Pneumatic Chuck with CNC base plate designed for high-volume CNC workholding, EDM workholding, electrode production, and automation-ready machining. Built from chrome steel with 32–60 HRC hardness, this multi-station pneumatic chuck provides 8000N + 8000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 600x410x62.5mm layout allows 12 chucks to be controlled by four air lines for efficient multi-part machining.
Read more
Erowa Compatible 9-in-1 CNC Pneumatic Chuck 410x450x100.5mm
Precision Erowa Compatible 9-in-1 CNC Pneumatic Chuck designed for CNC workholding, EDM workholding, automation-ready machining, and repeatable fixture positioning. Built from chrome steel with 57–60 HRC hardness, this pneumatic chuck provides 6000N + 6000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 410x450x100.5mm nine-station design allows nine chucks to be controlled by three air lines and is compatible with ER-007521, ER-007623, ER-007625, and ER-007604.
Read more
Erowa Compatible 8-in-1 CNC Pneumatic Chuck 560x310x100.5mm
Precision Erowa Compatible 8-in-1 CNC Pneumatic Chuck designed for CNC workholding, EDM workholding, automation-ready machining, and repeatable fixture positioning. Built from chrome steel with 57–60 HRC hardness, this pneumatic chuck provides 6000N + 6000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 560x310x100.5mm eight-station design allows eight chucks to be controlled by two air lines and is compatible with ER-007521, ER-007623, ER-007625, and ER-007604.
Read more
Erowa Compatible 6-in-1 CNC Pneumatic Chuck 410x310x100.5mm
Precision Erowa Compatible 6-in-1 CNC Pneumatic Chuck designed for CNC workholding, EDM workholding, automation-ready machining, and repeatable fixture positioning. Built from chrome steel with 57–60 HRC hardness, this pneumatic chuck provides 6000N + 6000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 410x310x100.5mm six-station design allows six chucks to be controlled by two air lines and is compatible with ER-007521, ER-007623, ER-007625, and ER-007604.
Read more
Erowa Compatible 4-in-1 CNC Pneumatic Chuck 330x290x100.5mm
Precision Erowa Compatible 4-in-1 CNC Pneumatic Chuck designed for CNC workholding, EDM workholding, automation-ready machining, and repeatable fixture positioning. Built from chrome steel with 32–60 HRC hardness, this pneumatic chuck provides 8000N + 8000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 330x290x100.5mm four-station design allows four chucks to be controlled by two air lines and is compatible with ER-007521, ER-007623, ER-007625, and ER-007604.
Read more
Erowa Compatible 3-in-1 CNC Pneumatic Chuck 460x102x100.5mm
Precision Erowa Compatible 3-in-1 CNC Pneumatic Chuck designed for CNC workholding, EDM workholding, automation-ready machining, and repeatable fixture positioning. Built from chrome steel with 32–60 HRC hardness, this pneumatic chuck provides 8000N + 8000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 460x102x100.5mm three-station design allows three chucks to be controlled by one air line and is compatible with ER-007521, ER-007623, ER-007625, and ER-007604.
Read more
Erowa Compatible 2-in-1 CNC Pneumatic Chuck 300x102x100.5mm
Precision Erowa Compatible 2-in-1 CNC Pneumatic Chuck designed for CNC workholding, EDM workholding, automation-ready machining, and repeatable fixture positioning. Built from chrome steel with 32–60 HRC hardness, this pneumatic chuck provides 8000N + 8000N clamping power, 0.002mm repeatability, and 6 bar operating pressure with air cleaning function. Its 300x102x100.5mm dual-chuck design allows two chucks to be controlled by one air line and is compatible with ER-007521, ER-007623, ER-007625, and ER-007604.
Read more
System 3R Compatible 3R-681.5X Macro 54 Multi 4 Quick Chuck Magnum 156 Pallet
System 3R compatible Magnum 156 pallet with four integrated Macro 54mm quick chucks for multi-electrode EDM and milling setups. Designed to hold multiple Macro 54mm pallets simultaneously while maintaining precise referencing and repeatable positioning within System 3R compatible tooling environments.
$4,052.00
Add to cart
System 3R Compatible 3R-600.24-S Macro 54 Multi 6 Quick Chuck Precision Rail
System 3R compatible 3R-600.24-S Macro 54mm multi 6 quick chuck precision rail designed for EDM and Wire EDM machining setups. This rail integrates six quick chuck stations to allow simultaneous mounting of multiple pallets or electrode holders while maintaining precise System 3R compatible referencing.
$4,711.00
Add to cart
System 3R Compatible 3R-600.23-S Macro 54 Multi 5 Quick Chuck DI00 Precision Rail
System 3R compatible 3R-600.23-S Macro 54mm multi 5 quick chuck DI00 precision rail designed for EDM and Wire EDM setups. This rail integrates five quick chuck stations for simultaneous pallet mounting while maintaining precise System 3R referencing and repeatable positioning.
$5,344.00
Add to cart
System 3R Compatible 3R-600.10-30 Macro 70 Multi 5 Pneumatic Chuck Precision Rail
System 3R compatible 3R-600.10-30 Macro 70mm multi 5 pneumatic chuck precision rail designed for automated EDM and Wire EDM machining setups. This assembly integrates five pneumatic chucks on a rigid rail, allowing automated clamping of multiple pallets while maintaining precise System 3R referencing.
$9,488.00
Add to cart
System 3R Compatible 3R-600.24-S Macro 54 Dual Quick Chuck with 90° RSM Mounting Plate
System 3R compatible 3R-600.24-S Macro 54 dual quick chuck designed for EDM and Wire EDM setups. This multi-station chuck includes two quick chuck interfaces mounted on a horizontal 90° RSM plate, allowing simultaneous positioning of multiple electrodes or fixtures while maintaining accurate System 3R compatible referencing.
$3,363.00
Add to cart
Erowa Er-036800 compatible 2 in 1 Integrated chuck system
Erowa Er-036800 compatible 2 in 1 Integrated chuck system. RHS-E036800 integrates 2 ER-036800 MTS IntegralChuck M-P/A to make the pallet table. The pallet table works same as Erowa 800635R0 Fixturing Table.The integrated system includes ER-048478 compatible Erowa MTS Chip Guard Low around the chucks. The MTS chip guard serves to seal the automatic MTS chucks and base plates when MTS pallets are used.
$5,250.00
Add to cart
Erowa ER-035519 compatible 9 in 1 Optimized Pneumatic Chuck with CNC Base Plate
Erowa ER-035519 compatible 9 in 1 Optimized Pneumatic Chuck with CNC Base Plate Rapid Holding Systems 9 in 1 optimized pneumatic multichuck station is equivalent to 9 unites of Erowa Er-035519 compatible ITS Chuck 100 P integrated in a base plate and the inner parts assemble into the base.We develop theis solution to get the advantages of ER-035519 ITS chuck in multichuck fashion. Air connections are at lateral side which are controlled by air gun or control unit. It applies to accommodating 9 pcs electrode holders or workpieces to do machining once at a time. Clamping force of each locator is up to 10000N. Rapid Holding Systems innovative new design helped many customers saving million of dollars to spend on a robot and get same performance from out RHS mutichuck stations.
Original price was: $11,500.00.$9,200.00Current price is: $9,200.00.
Add to cart
Erowa ER-035519 compatible 8 in 1 Optimized Pneumatic Chuck with CNC Base Plate
Erowa ER-035519 compatible 8 in 1 Optimized Pneumatic Chuck with CNC Base Plate Rapid Holding Systems 8 in 1 optimized pneumatic multichuck station is equivalent to 8 unites of Erowa Er-035519 compatible ITS Chuck 100 P integrated in a base plate and the inner parts assemble into the base.We develop theis solution to get the advantages of ER-035519 ITS chuck in multichuck fashion. Air connections are at lateral side which are controlled by air gun or control unit. It applies to accommodating 8 pcs electrode holders or workpieces to do machining once at a time. Clamping force of each locator is up to 10000N. Rapid Holding Systems innovative new design helped many customers saving million of dollars to spend on a robot and get same performance from out RHS mutichuck stations.
Original price was: $9,900.00.$8,500.00Current price is: $8,500.00.
Add to cart
Erowa ER-035519 compatible 4 in 1 Optimized Pneumatic Chuck with CNC Base Plate
Erowa ER-035519 compatible 4 in 1 Optimized Pneumatic Chuck with CNC Base Plate Rapid Holding Systems 4 in 1 optimized pneumatic multichuck station is equivalent to 4 unites of Erowa Er-035519 compatible ITS Chuck 100 P integrated in a base plate and the inner parts assemble into the base.We develop this solution to get the advantages of ER-035519 ITS chuck in multichuck fashion. Air connections are at lateral side which are controlled by air gun or control unit. It applies to accommodating 4 pcs electrode holders or workpieces to do machining once at a time. Two locators are controlled by a air gun or a air control unit. Clamping force of each locator is up to 10000N. Rapid Holding Systems innovative new design helped many customers saving million of dollars to spend on a robot and get same performance from out RHS mutichuck stations.
$7,500.00
Add to cart
Erowa ER-035519 compatible 6 in 1 Optimized Pneumatic Chuck with CNC Base Plate
Erowa ER-035519 compatible 6 in 1 Optimized Pneumatic Chuck with CNC Base Plate Rapid Holding Systems 6 in 1 optimized pneumatic multichuck station is equivalent to 6 unites of Erowa Er-035519 compatible ITS Chuck 100 P integrated in a base plate and the inner parts assemble into the base.We develop this solution to get the advantages of ER-035519 ITS chuck in multichuck fashion. Air connections are at lateral side which are controlled by air gun or control unit. It applies to accommodating 6 pcs electrode holders or workpieces to do machining once at a time. Clamping force of each locator is up to 10000N. Rapid Holding Systems innovative new design helped many customers saving million of dollars to spend on a robot and get same performance from out RHS mutichuck stations.
Original price was: $9,200.00.$7,800.00Current price is: $7,800.00.
Add to cart
Erowa ER-035519 compatible 4 in 1 Optimized Pneumatic Chuck with CNC Base Plate
Erowa ER-035519 compatible 4 in 1 Optimized Pneumatic Chuck with CNC Base Plate Rapid Holding Systems 4 in 1 optimized pneumatic multichuck station is equivalent to 4 unites of Erowa Er-035519 compatible ITS Chuck 100 P integrated in a base plate and the inner parts assemble into the base.We develop this solution for customer's special needs to install the multichuck at 90 degress on table with a increased height of base plate to get the advantages of ER-035519 ITS chuck in multichuck fashion at 90 degrees. 4in 1 multichuck station includes Four locators that are controlled by air gun or air control unit. Clamping force of each locator is up to 10000N. Rapid Holding Systems innovative new design is one step ahead to install the chuck systems at 90 dergee saving million of dollars to spend on a robot and get same performance from out RHS mutichuck stations.contact today to get 3d Cad model.
$7,250.00
Add to cart
System 3R MacroStandard 3R-600.23-S Compatible 3in1 Manual chuck rail
System 3R MacroStandard 3R-600.23-S Compatible Manual 3in1 chuck rail
Rapid Holding systems’ System 3R MacroStandard 3R-600.23-S Compatible Manual 3in1 chuck rail. The required drawbar is 3R-605.2 compatible. This system 3r chuck is having a flushing connection. Size of 3R-600.23-S System 3R compatible chuck is Φ 100X49.5mm. Request a quote for rail images.
$3,185.00
Add to cart
System 3R Compatible 2 in 1 CNC Pneumatic Chuck
System 3R Compatible 2 in 1 CNC Pneumatic Chuck. Quality System 3r Tooling RHS Brand 2 in 1 CNC Pneumatic Chuck is used to Position and Fix Workpiece for CNC lathe and is stainless steel material.Specifications:
| Product Size | 300x102x108.5mm |
| Material | Nippon Stainless Steel |
| Force Power | 10000N |
| Air Pressure Requirement | 6 Bar |
| Switch | 2 Chucks Control by 1 Switch |
| Application | Position and Fix Workpiece for CNC lathe |
$3,450.00
Add to cart