248-250-8937
519-999-9723
+1 844 686-0671
ER-032785 Erowa OEM Square 15 holder EWIS, ITS 100
Version ITS system size 100 Application EDM and chip-cutting processes.
ER-015629 Erowa OEM Square 25 Holder on Adapter ø 85
Version Clamping part fitted to flange, fixed with rods. Application For the construction on multiple fixtures. Mounting From above through the flange into the base.
ER-015627 Erowa OEM Square 15 Holder on Adapter ø 85
Version Clamping part fitted to flange, positioned with rods. Application For the construction on multiple fixtures. Mounting From above through the flange into the base.
ER-010622 Erowa OEM Square 25 Holder, Front Part
Version Only clamping part of the holder. Application For the construction on multiple fixtures.
ER-010592 Erowa OEM Square 25 Alignment Rail
Version Steel, hardened, ground. Application Testing of concentricity and angular accuracy of the holder to the ITS system.
ER-010586 Erowa OEM Square 15 Blank Holder 6mm
Version Steel, hardened, ground. Application To clamp round parts of ø 6 mm.
ER-010585 Erowa OEM Square 15 Blank Holder ø 8mm
Version Steel, hardened, ground. Application To clamp round parts of ø 8 mm.
ER-010507 Erowa OEM Square 15 Electrode Stand, Set of 10
Version Set of 10 stands, styrene. Application Storage and transport of blanks and electrodes.
ER-010505 Erowa OEM Square 25 Chip Guard
Version Set of 10 guards, oil-resistant rubber. Application Protection against chips during electrode manufacturing.
ER-010502 Erowa OEM Square 15 Chip Guard
Version Set of 10 guards, oil-resistant rubber. Application Protection against chips during electrode manufacturing.
ER-010497 Erowa OEM Square 15 Electrode Shaft M5, Set of 10
Version Set of 10 blanks, hardened, ground, including M5 bolts. Application To screw on to electrode blanks.
ER-010495 Erowa OEM Square 15 Alignment Rail
Version Steel, hardened, ground. Application Testing of concentricity and angular accuracy of holder to ITS system.
ER-010491 Erowa OEM Square 25 Electrode Shaft, Set of 24
Version Set of 24 shafts, soft steel, drawn profile. Application To solder or bond to blanks of up to 40 mm square.
ER-009866 Erowa OEM Square 15 Electrode Shaft
Version Set of 40 shafts, drawn steel. Application To solder or bond to copper or graphite electrode blanks.
ER-115379 Erowa OEM Pallet Ø 148 G Blank
Version Steel, rust-resistant. Without mounting hole pattern. With centering plate G (ground). With optimized center of mass. Application To accommodate electrodes, workpieces and fixtures for chip-cutting production. Fitting a blank In any suitable manner.
Erowa compatible ER-010753 supporting feet M5X16
Erowa compatible ER-010753 supporting feet. Er-09214 centering plate supporting foot M5X16. useful for RHS version centering plate 50. 100% cross compatible with Erowa supporting foot as well as centering plate 50. Supporting feet are 2 piece design using 1 part foot and 1 part threaded rod for better durabilty.
$14.40
Add to cart
Erowa ER-030671 compatible Centering plate G100 M8 x 1 (set of 5)
Erowa ER-030671 compatible Centering plate G100 M8 x 1 (set of 5). Rapid Holding Systems version palletset works same as Erowa ER-030671.
Application: To be fitted directly to workpiece and electrodes
to be used on flat chucks.
Also, available to sell as single pc.
$1,875.00
Add to cart
Erowa ER-030671 compatible Centering plate G100 M8 x 1 PalletSet W
Erowa ER-030671 compatible Centering plate G100 M8 x 1. Rapid Holding Systems version palletset works same as Erowa ER-030671.
Application: To be fitted directly to workpiece and electrodes to be used on flat chucks.
Also, available to sell as a set of 5.
$395.00
Add to cart
Mini Self centering vise System 3R 60X54mm-25mm clamping
Self-centering vise 60X54mm on System 3R 54 or 70mm macro pallet. RHS mini self-centering vise is 25mm clamping mounts directly on System 3R parts. Special holder to clamping small weight workpiece. Use a regular handle to threading the side screw to lock the workpiece and centering on the holder.
| SPECIFICATIONS | |
| Size | 60X54X52mm |
| Repeatability | within 0.005 |
| Material | High grade steel 48-52HRC |
| Max Clamping | 25mm |
| Torque | 20NM |
| Weight | 1kg |
$810.00
Add to cart
Self Centering Vise 60x54x61.5mm, System 3R Compatible
Precision self centering vise designed for 4th and 5th axis CNC machining, EDM workholding, and compact palletized fixture systems. Built from hardened chrome steel with 48–52 HRC hardness, this System 3R compatible vise provides ±0.005mm repeatability, 31mm max clamping width, and 200N clamping power. Its 60x54x61.5mm body supports accurate small-part positioning, repeatable fixture changes, and stable precision machining setups.
$810.00
Add to cart
3R-200.7J-STD compatible Reference element WEDM, 570 mm
3R-200.7J-STD compatible Reference element WEDM, 570 mm
$1,195.00
Add to cart3R-200.6J-STD compatible Reference element WEDM, 490 mm
3R-200.6J-STD compatible Reference element WEDM, 490 mm
$1,195.00
Add to cart3R-200.6J-1 compatible Reference element WEDM, 545 mm
3R-200.6J-1 compatible Reference element WEDM, 545 mm
$1,195.00
Add to cart3R-200.5J-STD compatible Reference element WEDM, 381 mm
3R-200.5J-STD compatible Reference element WEDM, 381 mm
$915.00
Add to cart