248-250-8937
519-999-9723
+1 844 686-0671
EROWA Compatible ER-010644 130X51 Uniplate Electrode Holder
EROWA ER-010644 130X51 Uniplate Electrode Holder
EROWA ER-010644 130X51 Uniplate Electrode Holder Designed for 130MM x 51MM Min blank stockAvailable in Aluminum, Stainless and BrassAll holders come pre-mounted on EROWA plate "Ready to Run"
$95.00
Add to cartErowa MTS Compatible 6 heads Pallet 700x600
Erowa MTS Compatible 6 head Pallet 700x600. Rapid Holding Systems pallet is used for clamping workpieces, vises and gauges.
$3,250.00
Add to cart
System 3R 3R-659.32-P Macro Collet Holder Compatible for ER32 Collets
System 3R Compatible 3R-659.32-P Macro Collet Holder for ER32 Collets
System 3R 3R-659.32-P compatible Collet chuck ER32 Macro
– Flushing duct.
– Electrode 2-20 mm.
– Building-in height 94 mm.
$727.00
Add to cart
EROWA ER-035154 compatible Electronic Chip holder
EROWA ER-035154 compatible Rapid chip with chip holder (ABS)Sleeve fitting with built-in data carrier. ∅18x18mm ABS EWIS Rapid chip: read only. Application in any RHS electrode holder and pallet which has been prepared for it.
$8.00
Add to cart
Erowa Pallet Chuck ER-090744 Heavy Duty Magnetic pallet compatible
EROWA COMPATIBLE ER-090744 Heavy Duty Magnetic Pallet Chuck
EROWA ITS 100 Compatible Heavy Duty Precision Magnetic Pallet Chuck Stainless Steel 420C 170*95*60 mm 6.7"x 3.74" Surface area 48~52HRC Comes compete with Erowa compatible ER-090744.
$995.00
Add to cart
EROWA COMPATIBLE ER-008566 Angle clamping unit
SAVE HUGE!!EROWA ITS ER-028471 Compatible Angle clamping unitManual ITS Chuck on which angles can be set continuously from 0 to 90°. Application in EDM and WEDM.This chuck makes it easyer to machine lateral gatings in injection molds. Various angles may be produced with standard electrodes.
$1,195.00
Add to cart
EROWA COMPATIBLE ER-008566 25mm sharp tooth rod RHS-E4500
| SPECIFICATION | |
| SIZE | 25X25X40mm |
| MATERIAL | STAINLESS STEEL 420 48-52HRC |
$29.00
Add to cart
Erowa ER-010607 compatible Square 25 electrode holder ITS 50
Erowa ER-010607 compatible Square 25 electrode holder ITS 50
Erowa ER-010607 compatible Square 25 electrode holder ITS 50. Applicable to EDM and WEDM.
$510.00
Add to cart
Erowa ER-035210 D72 ITS Blank Flat Stainless Steel Holder compatible
Erowa ER-035210 D72 ITS Blank Flat Steel Holder
Erowa ER-035210 D72 ITS Blank Flat Stainless Steel Holder compatible.ER-035210 is system size ITS 50. It is optimal choice for automatic production and it can carry work-piece whose weight is up to 20kgs. Attachment boreholes can be drilled according to requirements. Useful to mount electrodes and work pieces of various shapes and perfectly work with EROWA loading system.
$92.00
Add to cart
Erowa Uniplate ø 72 ER-035212 ITS Flat Steel holder compatible
Erowa Uniplate ø 72 ER-035212 ITS Flat Steel holder
Erowa Uniplate ø 72 ER-035212 ITS Flat Steel holder compatible. ER-035212 ITS Flat Steel holder is system size ITS 50 without spigot. It is optimal choice for automatic production.It applies to mount electrodes and work-pieces with surface more than square 40 x 40 mm or φ50 mm. Work-pieces and electrodes are locked by 2 Pin-lock locking pins.
$105.00
Add to cart
Erowa Uniholder ER-035211 D72 ITS U20 Stainless Steel holder compatible
Erowa Uniholder ER-035211 D72 ITS Stainless Steel holder
Erowa Uniholder ER-035211 D72 ITS U20 Stainless Steel holder compatible. ER-035211 is system size ITS 50. It is optimal choice for automatic production.It applies to mount electrodes and work-pieces with shaft of up to 20mm and it perfectly work with EROWA loading system.
$85.00
Add to cart
Erowa Prisound ER-035209 D72 ITS S25 Stainless Steel holder compatible
Erowa Prisound ER-035209 D72 ITS S25 Stainless Steel holder
Erowa Prisound ER-035209 D72 ITS S25 Stainless Steel holder compatible. ER-035209 S25 Stainless Steel Holder φ72 is compatible with EROWA ITS System, system size ITS 50. It is optimal choice for automatic production and it can carry work-piece whose weight is up to 20kgs. It applies to mount electrodes and work-pieces with shafts of up to square 25mm and perfectly work with EROWA loading system.
$95.00
Add to cart
Erowa ER-008856 Compatible Rotatable pendulum vise
Erowa ER-008856 Compatible 3 Axes High Precision Control Jig.
EROWA ER-008856 Rotatable pendulum vise. RHS version ER-008856 Rotatable pendulum vise 0 - 100 UnoSet clamps 0–100 mm and useful for adjustable workpiece positioning in three axes. Continuously able to rotate around 360°. Set with three pairs of clamping jaws
$1,495.00
Add to cart
EROWA ER-016691 compatible V-shape wire-cut EDM holder
| SPECIFICATION | |
| SIZE | 55X56X86.5mm |
| MATERIAL | NIPPON STAINLESS STEEL 57-60HRC |
| TOLERANCE | CONNECTIVITY TOLERANCE ± 0.05mm |
| APPLICATION | SUITABLE FOR EDM/WEDM |
$325.00
Add to cart
System 3R Macro-Junior 3R-466.4033 compatible Manual chuck adapter
System 3R Macro-Junior 3R-466.4033 compatible Manual chuck adapter
For mounting in the Macrosystem. Axial locking screw with channel for flushing through the electrode.- Application: For EDM Machining – Adapted for automatic changing. – Fixed index positions 3×120°. – Precision-cast Macro reference element.
$1,550.00
Add to cart
Erowa ER-033300_ER-033302 Compatible MTS 4-in-1 base plate 360 x 400 P
Erowa MTS ER-033300, ER-033302 Compatible 360 x 400 P
Erowa ER-033300, ER-033301 Compatible MTS 4 in 1 base plate 360 x 400. Rapid Holding Systems. MTS 4 in 1 base plate 360 x 400 is compatible with EROWA ER-033300 & ER-033301. MTS base plate universal. Its connections are on the lateral side, pneumatic operation. It is used to accommodate multiple pallets. For direct assembly on the machine table. Attachment boreholes can be drilled.
$8,495.00
Add to cart
Erowa UPC ER-024562 Compatible Centering Segments and Chucking Spigots
Erowa ER-024562 Compatible UPC Centering Segments and Chucking Spigots. Rapid Holding Systems Erowa ER-024562 Compatible has UPC Centering Segments (U) or plates and Chucking Spigots with EROWA UPC system. It is equivalent to ER-024562 UPC centering segments (U) and chucking spigots. Its application is to produce special UPC pallets. Mounting with bolts through the pallet from below. Please note that easy to assemble on the PreSet Basis UPC presetting station ER-014309.
$510.00
Add to cart