Category: EDM Tooling

What Are CNC Pull Clamps? 

CNC pull clamps are modular workholding systems that secure a part from below instead of from the top or sides. 

They use a pulling force to draw the workpiece down against a reference surface, creating a secure, repeatable, and low-profile setup. 

In simple terms: instead of blocking your toolpaths with clamps, pull clamps hold the part while keeping it fully accessible. 

Why Traditional Clamping Limits Your Machining 

Most shops don’t realize it, but a big chunk of inefficiency comes down to how the part is held. 

Top clamps block cutting areas. Multiple setups are required to machine all faces. Operators spend time repositioning and re-referencing parts. 

The result? Longer setup times, more risk of error, and more scrap and rework. 

How CNC Pull Clamps Solve the Problem 

Pull clamp systems change how force is applied, and that changes everything. 

Key advantages: 

• Full top and side access — ideal for 5-axis and multi-face machining 

• Fewer setups — machine more features in a single operation 

• Repeatable positioning — parts locate consistently every time 

• Low-profile design — perfect for tight work envelopes and automation 

• High clamping force — secure even during aggressive cuts 

How CNC Pull Clamps Work 

1. Mount the pull clamp module onto your fixture or base plate 

2. Prepare the part with a compatible clamping feature (slot, groove, or pull stud) 

3. Engage the clamp from below 

4. Apply pulling force to seat the part firmly against the reference surface 

5. Start machining with full access to the critical areas 

This approach keeps the reference consistent while maximizing machining access. 

Pull Clamps vs. Traditional Clamping 

When Should You Consider Switching? 

If any of these sound familiar, it’s worth taking a closer look: 

• You’re losing hours every week on setups 

• Operators are constantly adjusting parts 

• You need better access for 5-axis machining 

• Scrap is coming from inconsistent clamping 

• You’re planning to automate or scale production 

CNC pull clamps let you machine more, in fewer setups, with higher consistency. 

They remove one of the biggest hidden bottlenecks in machining: limited access and inefficient clamping. 

If you’re working on a complex part or trying to cut down on setups, it’s worth taking a closer look at your current workholding strategy. 

Sometimes the problem isn’t the machine. It’s the setup.

In CNC and EDM shops, every minute a machine isn’t cutting is lost revenue. Long setup times for aligning parts, swapping electrodes, or changing fixtures are one of the biggest productivity killers on the floor. 

This article breaks down how Rapid Holding Systems’ Multi-Chuck solutions can help cut that unproductive time and get more performance out of your machines, without the cost of robotics. 

The Real Cost of Long Setup Times 

Changing an electrode or workpiece can take 30 to 45 minutes. During that window, your machine sits idle and adds zero value. 

The problem gets worse in high-mix or small-batch environments where changeovers happen constantly. The math is simple: fewer setups mean more cutting time. 

What Is a Zero-Point Multi-Chuck? 

A Multi-Chuck is a rail or base that holds several zero-point chucks in a single unit. Each chuck uses pull-studs and hardened surfaces to locate a workpiece with plus or minus 0.005 mm repeatability. 

Instead of relying on a single chuck, the rail supports multiple aligned chucks that can be actuated manually or pneumatically, depending on your setup. 

Key Advantages 

Quick changeovers: Prep the workpiece off the machine and drop it into the chuck in seconds. That’s a dramatic cut in downtime. 

Better use of table space: Mounting multiple chucks on one rail eliminates the footprint limitations of conventional single chucks and maximizes your machine table’s real estate. 

Flexible compatibility: Variants are available for System 3R and EROWA, so you can keep using your existing tooling. 

Custom configurations: Rapid Holding Systems tailors the number of chucks and the actuation type to match your specific workflow. 

Real-World Performance 

Operators using EROWA MTS chucks report that once parts are locked in, they don’t move. That kind of rigidity is what makes zero-point systems a reliable choice for tight-tolerance work. 

Multi-Chucks are used across electrode manufacturing, small-batch machining, 5-axis operations, and high-precision mould and die production. And compared to OEM solutions, RHS-compatible alternatives can cost 40 to 50 percent less, delivering results comparable to robotics at a fraction of the investment. 

Is a Multi-Chuck Worth the Investment? 

For high-mix shops and custom job environments, Multi-Chucks offer a practical path to higher productivity without committing to full robotic automation. Because each configuration is built around your specific needs, you get a workholding solution that fits your machines and your processes, not the other way around. 

Ready to Cut Downtime? 

If you want to improve shop efficiency and reduce setup times, a Multi-Chuck system is worth a serious look. It brings together fast changeovers, repeatable precision, and space savings, all while staying compatible with your existing System 3R or EROWA reference systems. 

To find out how it fits your production setup and to get a return on investment estimate, reach out to the team at Rapid Holding Systems. 

Modern machining demands fast tool changes and repeatable positioning. EROWA-compatible pallets help you automate workpiece setup and get the most out of your machine capacity. Here’s an overview of the EROWA system’s advantages — and how Rapid Holding Systems (RHS) delivers 100% compatible, affordable pallets. 

What Is the EROWA MTS System? 

The EROWA MTS is a zero-point clamping system built for versatility. It supports single workpiece clamping with one MTS chuck, or multiple workpieces using several chucks or base plates. 

The MTS 4.0 version takes things further with wireless digital status monitoring, so your machine control can display real-time chuck conditions. Only two pneumatic lines are needed to operate the base, and an integrated battery handles power supply. 

The MTS 3.0 variant prioritizes safety. It meets ISO 13849 (PLd-Cat 3) and includes a self-locking mechanism that keeps chucks closed even if pressure is lost. An air circuit also verifies that the spigot is present and locked before machining starts. 

MTS base plates are fully modular, available in 1, 2, 4, 6, or 8-chuck configurations — with custom solutions possible. This design dramatically cuts setup time: workpieces are palletized off the machine and loaded in seconds. The low build height accommodates large parts, contact surfaces are cleaned automatically during changeover, and existing vises, gauges, and fixtures can be reused. Pairing tombstones with MTS plates makes the most of your working space. 

Technical Advantages of the MTS and UPC Systems 

The MTS system is open and flexible, supporting both single and multiple palletizing with repeatability better than 0.003 mm. Pallets can be indexed at 4 × 90°, use a spring-powered self-locking mechanism, and include built-in cleaning for functional surfaces. Pallet changes can be automated, and all control and monitoring run through just two air lines. 

The EROWA UPC system is designed for high precision across both large and small parts. Repeatability is below 0.002 mm, with 4 × 90° indexing and robust centering segments featuring a patented preload. An optional ITS chuck can be integrated at the center, and four fixed spigots act as supports and clamping devices. 

UPC aluminum pallets include hardened Z-supports and centering segments, making cost-effective custom solutions possible. The system has a low installation height, uses compressed air for opening and cleaning, delivers a pull-down force of 50 kN, and all components are sealed against coolant and chips. 

Examples of Our Compatible Pallets 

Rapid Holding Systems manufactures pallets fully compatible with EROWA. Here are some examples from our catalog: 

These pallets integrate directly with MTS or UPC chucks. The precision, finish, and material quality make them suitable for both high-precision CNC machining and EDM operations. 

Why Choose Rapid Holding Systems? 

Rapid Holding Systems specializes in EDM and CNC clamping systems. Our pallets are 100% compatible with EROWA, made from high-quality steel, and tested to strict repeatability standards. Based in North America, we offer several key advantages: 

100% customer satisfaction guarantee — if a product doesn’t meet your expectations, we’ll make it right. 

No tariffs, delivery included — we ship directly to your door with no import duties. 

Lowest price guarantee — find an equivalent at a better price, and we’ll match or beat it. 

High-quality, affordable tooling — in-house engineering and premium materials deliver performance without the premium price tag. 

When you choose our products, you get reliable, precise pallets plus technical support, system selection guidance, and custom manufacturing options. Our online catalog makes it easy to find the right model for your needs. 

Ready to Boost Your Workshop’s Productivity? 

The EROWA MTS and UPC systems offer a robust, flexible foundation for machining automation. Self-locking mechanisms, automatic cleaning, digital monitoring, and micron-level repeatability mean parts change in seconds — and unproductive downtime drops dramatically. 

Rapid Holding Systems offers fully compatible pallets for both systems, backed by competitive pricing and local North American support. 

Contact us today. Our team can help you choose the right MTS or UPC configuration, prepare a quote, and arrange a demonstration. 

There’s a mistake even experienced machine shops make: investing in top-of-the-line CNC equipment, then overlooking how the part is actually held in place. 

The result is always the same — vibration, dimensional errors, rework, and lost time. And the frustrating part? The problem isn’t the machine. It’s the workholding. 

Setup Time Is the Bottleneck Nobody Talks About 

In CNC and EDM manufacturing, cutting time is only part of the equation. The time spent mounting, adjusting, and re-verifying parts can eat up a massive chunk of total production time. 

A poorly chosen clamping system forces operators into a loop: manual adjustments, position checks after every changeover, and setups that should take seconds but take much longer. 

Precision workholding systems exist exactly to break that loop. 

What Makes a High-Precision Clamping System Different 

Not all vises are created equal. A self-centering vise, for example, doesn’t just hold the part — it centers it automatically, applying equal pressure on both sides. That translates into real repeatability across every part in a production run. 

Working with round, hexagonal, or irregularly shaped parts? A conventional vise will give you headaches. A self-centering vise won’t. 

And once you move into 5-axis machining or robotic loading, consistent part positioning stops being an advantage — it becomes a requirement. 

The Fastest Change You Can Make: Zero-Point Systems 

If there’s one technology that fundamentally changes setup logic on the shop floor, it’s the zero-point system. 

The concept is straightforward: instead of re-referencing the part from scratch every time, the system holds the reference for you. You swap the fixture in seconds, the machine already knows where the part is, and you keep cutting. 

The practical result? Setup time reductions of up to 90%. That’s not a marketing claim — it’s geometry. 

A Complete Line for Every Application 

Rapid Holding Systems (RHS) has built a product range that covers virtually any machining scenario: 

Self-centering vises — with repeatability down to 0.005 mm and stainless steel bodies. Ideal for batch production and irregular parts. 

Zero-point bases and quick-change systems — swap fixtures in seconds while holding ±0.01 mm accuracy. Compatible with 3-axis, 4-axis, and 5-axis machining, EDM, and inspection. 

Modular vises — adapt to a wide range of part sizes and geometries, with fast configuration changes and consistent clamping pressure throughout. 

Pyramids and tombstones for 5-axis machining — precision-machined structures with multiple mounting surfaces, designed to machine several faces of a part in a single setup. 

Every component is manufactured from hardened stainless or alloy steel to handle heavy cutting forces while resisting corrosion and vibration. 

The Right Question Isn’t Whether It’s Worth It — It’s How Much You’re Losing Without It 

Every unnecessary setup hour has a cost. Every rejected part from a positioning error has a cost. Every time an operator has to re-verify a reference, that’s time and money gone. 

Precision workholding isn’t an expense — it’s the investment that makes the rest of your machinery investment actually pay off. 

Not sure where to start? RHS offers free consultations to help you identify the right system for your specific process. 

About Rapid Holding Systems  

At Rapid Holding Systems, we understand the reality of the shop floor. When setups fail, it’s not just a tool problem. It’s a waste of time, missed deadlines, and unnecessary stress. For over 20 years, we’ve specialized in precision-compatible workholding solutions for CNC, EDM, and Wire EDM operations. We work with manufacturers who demand repeatability, not excuses, providing proven compatibility with System 3R and EROWA systems backed by real-world application knowledge. From standard solutions to custom tooling, we help precision manufacturers achieve faster setups, improved accuracy, and the confidence that their tooling will perform consistently—every single time.  

Want to solve your setup challenges? Reach out at [email protected] 

Every minute spent re‑indicating a part is a minute not cutting. In production CNC environments that cost compounds quickly. Setup variability between shifts, inconsistent holding force during aggressive cuts and the inability to move work between machines without losing your datum translate directly into re‑work, scrap and lost tool life. A standardized pallet system solves these headaches by encoding the datum directly into the tooling. This article explains how System 3R‑compatible CNC table chucks work, how manual and pneumatic versions differ mechanically and how to select a setup that fits your shop. Where appropriate we’ve added links to the Rapid Holding Systems product pages so you can explore the exact products discussed. 

Why CNC repeatability breaks down 

Most shops start with vises. A vise gets the job done, but it does not give you a repeatable datum. Every time a part is removed and replaced the position changes. Every time a setup moves to a different machine you start from scratch. When a different operator runs the same job, the result may differ slightly from the previous shift. Those inconsistencies accumulate – they’re manageable in prototype work but a problem in production. Inconsistent clamping force during steel roughing leads to chatter, deflection and surface finish issues. The underlying issue is always the same: no fixed, repeatable datum in the workholding system. 

Understanding the System 3R pallet system 

A System 3R‑compatible pallet system works on a simple principle. The chuck mounts permanently to the machine table. The pallet carries the workpiece or fixture. When the pallet engages the chuck it locks onto a precise mechanical datum that repeats to within microns every time. The datum is established through the spigot on the underside of the pallet. As the chuck locks it pulls the pallet down onto the datum faces and clamps it. The result is a known repeatable X, Y and Z position on every insertion. A part can be removed for offline inspection, measured on a CMM and returned to the machine in the same position without re‑indicating. The same pallet can move between any machine fitted with a compatible chuck and locate accurately without additional setup work. 

At Rapid Holding Systems (RHS), System 3R‑compatible pallets and chucks follow these standards so shops can mix and match components from different suppliers. For example, their 54 mm pallet is available as a precision ground 54×54 mm unit with hardened faces and four index positions. You can see the product details here: 3R Compatible 3R‑651.7E‑XS pallet 54 mm Macro. For larger workpieces there’s a 70 mm pallet option such as the System 3R 3R‑601.1E‑P compatible pallet 70×70 mm, which provides a larger footprint while preserving the same datum geometry. 

Manual CNC chuck operation 

The traditional way to clamp a pallet into the System 3R chuck uses a mechanical screw. RHS offers a direct replacement for the OEM manual chuck: the System 3R 3R‑610.21 Manual Chuck Macro. It uses a short spigot on the pallet to locate the assembly, then an Allen key draws the pallet down onto the datum faces. Releasing the pallet reverses the process. This chuck requires no air supply and minimal maintenance. For low‑to‑medium volume production, standalone machines or shops where automation isn’t on the horizon, it’s a cost‑effective way to standardize the datum. You can read more about this chuck and order it online here: System 3R 3R‑610.21 manual chuck Macro. 

When to choose a manual chuck: 

• You run jobs in small batches and change pallets infrequently. 

• Your machines are standalone and not integrated into an automated cell. 

• You value simplicity and want minimal infrastructure – no air lines or additional control signals are needed. 

• You’re establishing a datum system for the first time and want an affordable entry point. 

Pneumatic CNC chuck operation 

As production volumes rise the manual Allen key becomes the bottleneck. A pneumatic chuck removes the wrench and replaces it with compressed air actuation. The System 3R 3R‑600.10‑30 compatible pneumatic table chuck MacroHP uses a longer spigot on the pallet to accommodate the internal air‑driven mechanism. The chuck body has two air inlets – one to clamp and one to release. Connecting shop air to the engage port draws the pallet onto the datum under pressure; connecting air to the release port frees it. The active actuation in both directions gives consistent clamping force and predictable cycle times. Robots and pallet changers can interface directly with the chuck’s pneumatic ports for fully automated loading. Learn more about this chuck here: System 3R 3R‑600.10‑30 compatible pneumatic table chuck MacroHP. 

When to choose a pneumatic chuck: 

• You change pallets frequently and changeover time directly affects output. 

• Your machine is part of an automated cell or uses robotic loading. 

• You want to integrate pallet engagement with machine control logic or PLCs. 

• You need speed and consistency to maximize machine utilization. 

54 mm vs 70 mm pallet systems 

Two common pallet sizes support System 3R setups for smaller workholding applications. Both sizes use the same datum geometry; the difference is footprint and holding force. 

54 mm pallets are often associated with graphite electrode machining because sinker EDM workflows favour a smaller pallet. However there’s no technical reason to limit them to graphite. A hardened 54 mm pallet like the 3R‑651.7E‑XS 54 mm Macro pallet can be used for steel components if the part size and cutting forces fall within its capability. This size is ideal for small parts, electrodes or fixtures where machine envelope and tool access are at a premium. 

70 mm pallets provide a larger contact area and higher holding force. A pallet such as the 3R‑601.1E‑P 70×70 mm Macro pallet is better suited for larger workpieces, heavier fixtures or more aggressive milling. The increased diameter distributes clamping loads and provides more stability during high‑feed machining. When selecting a pallet size consider part dimensions, fixture geometry and the cutting forces you expect; the material itself (steel versus graphite) is less important than those factors. 

What about the Macro Magnum? 

For heavy‑duty machining there is a larger format known as the Macro Magnum. Its 6.5 inch (165 mm) pallet distributes clamping force over a much wider area and can generate holding forces around 16 000 Nm. This makes it suitable for aggressive stainless steel or Inconel roughing on 3‑ or 5‑axis machines. RHS supplies Macro Magnum chucks with a slotted base plate to bolt directly to your table. If your parts exceed the limits of the 54 mm and 70 mm system or you need maximum rigidity, contact Rapid Holding Systems for options – the Macro Magnum chuck isn’t listed on the website yet but the team can quote it on request. 

Manual vs pneumatic: comparison summary 

Both systems use the same pallet datum and deliver repeatable location accuracy. The difference lies in how clamping force is applied and how well the chuck integrates into your workflow. 

Choosing the right System 3R‑compatible setup 

Ultimately your choice depends on production volume, changeover frequency and automation intent: 

• Entry‑level shops should start with a manual chuck and a set of 54 mm or 70 mm pallets. The upfront cost is lower and you can standardize your datum without installing air lines. As your business grows, you can retrofit a pneumatic chuck onto the same table and reuse all pallets. 

• High‑volume or automated cells benefit from the pneumatic chuck immediately. Fast clamping cycles and integration with robots or pallet changers keep spindles cutting instead of waiting on manual intervention. When paired with 70 mm pallets, the pneumatic chuck forms the backbone of a scalable production cell. 

• Heavy‑duty 5‑axis machining may justify the Macro Magnum with its larger pallet and extreme holding force. Contact RHS to discuss your specific application. 

Pallet standardization resolves the repeatability problem at its source. When the datum is fixed in the tooling rather than re‑established at each setup, setup time drops, scrap decreases and machine utilization improves. System 3R‑compatible chucks and pallets from Rapid Holding Systems provide standardized datums in formats that suit a range of applications. Whether you start with a manual chuck and 54 mm pallets, upgrade to a pneumatic chuck with 70 mm pallets, or move to a Macro Magnum for heavy roughing, the underlying principle stays the same: get the datum right and everything else becomes easier. Explore the linked products above and contact Rapid Holding Systems if you need help choosing the best configuration for your shop. 

In precision manufacturing, we all talk about tolerances, stability, and repeatability. But there’s something many shops leave out of the equation: 

Maintenance of their clamping systems. 

It doesn’t matter if your workholding system was a well-planned investment, compatible with the most demanding standards. Over time, any component subjected to constant cycles, coolant exposure, metal particles, or pneumatic pressure starts to change: 

# Axes lose smoothness 

# Surfaces no longer seat properly 

# Springs stop applying consistent force 

# Fine dust affects repeatability 

All of this can happen without you noticing. Until you notice it on the machine. 

Maintenance Isn’t a Technical Luxury. It’s Part of the Process. 

In shops running CNC, EDM, or WEDM equipment, workholding tools aren’t accessories. They’re the origin point of precision. 

And when that point fails, everything else starts to suffer: setup quality, inspection results, delivery schedules. 

Regular maintenance of your clamping systems means: 

• Preserving the repeatability your parts require 

• Reducing scrap and downtime from invisible causes 

• Ensuring every tool change performs like the last one 

• Extending the life of your investment 

Basic Steps to Keep Your Workholding at 100% 

These steps apply regardless of which system you use: 

1. Deep clean every 3 to 6 months 
Remove coolant residue, contaminated grease, and accumulated fine dust. 

2. Use technical lubricants, not generic ones 
It’s not just about “greasing.” Apply lubricants designed to resist pressure and repetitive cycles without breaking down. 

3. Inspect springs, seals, and active surfaces 
Replace components showing wear. Failures rarely come from one thing. They come from small deviations adding up over time. 

4. Follow recommended assembly patterns 
There are technical reasons behind the proper order of component installation. Don’t improvise. 

Caring for What You Have is Part of Being a Precision Shop 

Investing in quality workholding  is only half the journey. The other half is keeping them in optimal condition. 

A well-mounted setup is useless if the holder doesn’t clamp properly. A perfect CAD model means nothing if clamping isn’t consistent between cycles. 

Practical Example: Step-by-Step Maintenance 

To help you put all this into practice, we’ve prepared a video showing a real maintenance example. In it, we demonstrate complete servicing of the: 

EROWA ER-007521 Compatible CNC 80 mm Square Pneumatic Chuck 

📽️ [Watch the video] 

RHS EDM and CNC Productivity Bundles Make Every Setup Count.

In EDM and CNC production, time between jobs can be just as costly as cutting time itself. 
If your operators spend hours changing setups, adjusting fixtures, or chasing alignment errors, your machines are not running at full capacity. 

At Rapid Holding Systems, we developed a series of designed to keep your shop standardized, fast, and profitable — without the need for new equipment. 
Each system is compatible with System 3R or Erowa, offering full precision repeatability and quick transitions between jobs. 

Bundles That Make Every Setup Smarter 

Erowa ER-034387 Compatible Quick Chuck Complete Setup 

Switch between parts in seconds while maintaining micron-level precision. 
This bundle combines a quick chuck, drawbars, and accessories that deliver stability and repeatability for both EDM and milling applications. 

3R-659.32-P Macro Collet Holder for ER32 Collets 
A versatile solution for holding a wide range of tools and parts. 
Its compact design and System 3R compatibility allow fast, secure clamping for consistent setups every time. 

3R-628.31-S Compatible User Kit Macro 
Achieve full standardization across your machines and operators. 
This user kit simplifies workflow transitions, ensuring that every setup fits perfectly on every compatible machine in your shop. 

At RHS, we understand that real productivity is not just about faster machines — it is about smarter setups. 
Our EDM bundles simplify complex workflows, reduce changeover time, and keep your machines cutting nonstop. 

Stop wasting time between jobs. 
Equip your machines with RHS EDM Productivity Bundles and keep your workflow moving efficiently. 

📧 [email protected] 
☎ +1 519-999-9723 

If you’ve been running WEDM for a while, you know how frustrating slow setups and alignment issues can be. 

 
Every extra minute spent adjusting tooling is a minute your machine isn’t cutting — and when you’re using OEM System 3R components, those delays can be costly in more ways than one. 

At Rapid Holding Systems, we designed the System 3R 3R-242.82HP Compatible User Kit to give you quick, precise, and repeatable positioning without the long lead times or high costs of OEM parts. 

Most of our customers face the same set of frustrations in their WEDM workflows: 
Slow setups, alignment issues that cause scrap and rework, and long waits (with high costs) for OEM System 3R components. 

Standard setups get the job done, but they’re rarely fast. Every extra adjustment is lost production time, and when you’re relying on precision tooling, even small delays can throw off delivery schedules. 

Shops running demanding EDM workflows need a faster, smarter alternative. 

Why Our Customers Love Rapid Holding Systems Solutions 

Our WEDM User Kits are built to solve the very challenges shops face every day. Instead of waiting weeks and paying OEM prices, our customers get: 

• Full System 3R Compatibility – Seamless integration into existing setups, no hacks or workarounds needed. 

• Faster Setups & Higher Productivity – Reduce downtime, cut scrap, and keep machines running. 

• Proven Reliability – Precision components designed for demanding EDM environments. 

• Complete Kits – Everything you need in one package, from ruler vices to levelling adapters, delivered ready to install. 

With Rapid Holding Systems, shops don’t just replace parts—they gain a partner that understands the urgency, precision, and cost pressures of modern manufacturing. 

The 3R-242.82HP Compatible User Kit is a drop-in replacement that integrates seamlessly with your existing System 3R interface. 

 
No guesswork. No hacks. Just plug in, align, and cut with confidence. 

Included in the kit: 

• 3R-239.1 Compatible – Ruler Vice – Secure and precise clamping for square and rectangular workpieces. 

• 3R-272HP Compatible – Levelling Adapter HP – Ensures perfect height alignment and repeatable setups. 

• 3R-292.66HP Compatible – Magnum Holder HP – Heavy-duty holding power for larger or high-value components. 

Key Benefits 

50% lower cost vs. OEM System 3R components 
100% guaranteed compatibility with your existing 3R setup 
Fast, repeatable setups — improve productivity instantly 
Built for demanding EDM environments — reliable under continuous use 

Our customers report dramatic reductions in setup time, improved alignment accuracy, and the confidence of knowing that replacement parts are always available without OEM delays. 
The ruler vice’s movable jaws allow you to clamp variable-length workpieces with ease. The levelling adapter ensures every setup is perfectly aligned. And the magnum holder keeps even large parts secure during long EDM runs. 

Other User Kit Options from RHS 

We know every shop’s needs are different — so we offer a full range of System 3R-compatible user kits to match your workflow. 

1. System 3R WEDM 3R-242HP Compatible User Kit 

🔗 View Product 

Includes: 

• 3R-225 Compatible Reference Stop 

• 3R-272HP Compatible Levelling Adapter HP 

• 3R-292.3 Compatible SuperVice <100 mm 

• 3R-293.3 Compatible SuperVice Ø8–90 mm 

• 3R-294.3 Compatible Vice <100 mm 

• 3R-914.07 Compatible Torque Wrench 7 Nm (1 pc) 

• Allen Keys (3 mm & 5 mm) 

Perfect for: Shops needing maximum versatility in clamping solutions for small to medium workpieces. 

2. System 3R 3R-242S-3 Compatible User Kit 

🔗 View Product 

Includes: 

• 3R-232 Compatible Levelling Adapter (1 pc) 

• 3R-293.33 Compatible Universal Holder (1 pc) 

• Allen Keys (3 mm & 5 mm) 

Perfect for: Precision setups where universal holding is a must. 

3. System 3R 3R-209-860.4 Compatible EconoRuler Kit 

🔗 View Product 

Includes: 

• 3R-209-860 Ruler (860 mm) 

• 3R-261.1 Support 

• 3R-209.1 Ruler Vice, Econo 

• Allen Keys (3 mm & 5 mm) 

• Additional Accessories 

Perfect for: Budget-conscious shops that still need reliable ruler and clamping performance. 

See the full specs and order here: 
System 3R 3R-242.82HP Compatible User Kit 

📞 Questions? Contact us at [email protected] or call +519-999-9723.